Haven’t you always known cleaning using hot water and steam
cleaning is the same thing? Well if you have you should unlearn it as soon as
possible because it is far from the truth. While many people continue to
mistake cleaning from water that is hot and cleaning that uses steam as the
same carpet cleaning process, they are in fact two different methods.
Each of the methods uses different temperatures of water and
in most cases depending on the cleaning services you employ, even different cleaning solutions.
So before you set out to choose one over the other, here is low down on how
each of them is different to make sure you make the correct decision.
The Basics
As mentioned above, the primary difference in the cleaning
process of both of these methods is in the temperature of the water used. That
is pretty obvious is you have ever learned science since steam will need a much
hotter temperature or water as opposed to the normal water hotness.
Steam Cleaning uses actual steam for carpet cleaning (as its
name so aptly suggests). The temperature of the water for use in steam cleaning
can be as high as 212 Fahrenheit to make sure that the water being used can
quickly transform them into gas.
As opposed to steam
cleaning hot, cleaning done using hot water only requires water that is hot not
on the verge of becoming steam. The
water only needs to be as hot as it is needed to allow for a thorough and
effective cleaning. Simply put the water used in hot water cleaning, a
technique used sparingly by cleaning
services in McKinney needs to be under the temperature of water needed
for steam cleaning.
Uses
One of the reasons that leading carpet cleaning services have
been using cleaning done from hot water also known as hot water extraction to
clean carpets is because it’s recommended by carpet manufacturers. The use of
hot water allows for the cleaning of the fibers of the carpet without allowing
it to shrink. Hot cleaning can be used for cleaning of stain which is unlike
what steam cleaning can do.
Stain cleaning is not something the steam cleaning method is
used for since the heat of the steam and other mechanisms at work can result in
the stain becoming permanent instead of a removal. Often steam cleaning has
been used to clean synthetic carpets, since it is believed that heat of steam
can increase its cleanliness.
Conclusion
Depending on the carpet cleaning services you opt for, both cleaning techniques can be
used to clean and liven up the carpets. These methods are increasingly being
used by carpet cleaners primarily because they have an advantage over the use
of detergent in carpet cleaning. Since the use of detergents is known to leave
high levels of detergent residue in the carpet making it dirty again in a short
span.
While both methods are in more ways than one different to
each other, yet hot water extraction or cleaning is a better fit for most
carpets as opposed to steam cleaning.
